Millipore direct-q 3 R User Manual

Maintenance
46
Installation
D
• Remove the new SmartPak cartridge from its shipping box.
• Remove the protective caps on the ports of the SmartPak cartridge.
• Locate the O-rings on the ports. Wet them with water. It is
preferable to wet them with ultrapure water.
• Install the SmartPak cartridge until it is fully seated into the system
ports as shown (D, E and F).
E
F
• CLOSE THE FRONT COVER.
G
NOTE:
The Tank Outlet Valve should be left open (G).

Millipore direct-q 3 R Specifications

General

Brand	Millipore
Model	direct-q 3 R
Category	Water Filtration Systems
Language	English