Millipore Simplicity User Manual

Page 16/36
Page 16/36
Page 16/36
These different modes are displayed on the screen, and are described below:
OPERATING STATUS OF SYSTEM
MODE DISPLAY
STANDBY While in this mode, the system is not producing purified water.
Periodic recirculation is performed.
OPERATE System is running. Purified water can be delivered by opening the
PROD:18.2 MΩ.cm dispensing valve.
RECIRCULATION In STANDBY mode, the system automatically recirculates the water
5 mn every 3 hours in order to maintain the water quality during
periods of non-use.
OPERATE System is running and displays the water temperature instead of
TEMP.19°C the resistivity.
OPERATE System is running. Purified water can be delivered. Resistivity
19.8 MΩ.cm 22.9°C measure is not compensated at 25 °C. Water resistivity and
temperature are displayed permanently.
Cleaning ________________________________________________
The exterior of the Simplicity may be cleaned using a soft cloth dampened with a mild detergent.
Prior to cleaning assure that the system main AC power has been disconnected.
System maintenance messages _____________________________
See section “Troubleshooting” pages 26 and 27.
STANDARD OPERATING OF THE SIMPLICITY __________________
These different modes are displayed on the screen, and are described below:
OPERATING STATUS OF SYSTEM
MODE DISPLAY
STANDBY While in this mode, the system is not producing purified water.
Periodic recirculation is performed.
OPERATE System is running. Purified water can be delivered by opening the
PROD:18.2 MΩ.cm dispensing valve.
RECIRCULATION In STANDBY mode, the system automatically recirculates the water
5 mn every 3 hours in order to maintain the water quality during
periods of non-use.
OPERATE System is running and displays the water temperature instead of
TEMP.19°C the resistivity.
OPERATE System is running. Purified water can be delivered. Resistivity
19.8 MΩ.cm 22.9°C measure is not compensated at 25 °C. Water resistivity and
temperature are displayed permanently.
Cleaning ________________________________________________
The exterior of the Simplicity may be cleaned using a soft cloth dampened with a mild detergent.
Prior to cleaning assure that the system main AC power has been disconnected.
System maintenance messages _____________________________
See section “Troubleshooting” pages 26 and 27.
STANDARD OPERATING OF THE SIMPLICITY __________________
These different modes are displayed on the screen, and are described below:
OPERATING STATUS OF SYSTEM
MODE DISPLAY
STANDBY While in this mode, the system is not producing purified water.
Periodic recirculation is performed.
OPERATE System is running. Purified water can be delivered by opening the
PROD:18.2 MΩ.cm dispensing valve.
RECIRCULATION In STANDBY mode, the system automatically recirculates the water
5 mn every 3 hours in order to maintain the water quality during
periods of non-use.
OPERATE System is running and displays the water temperature instead of
TEMP.19°C the resistivity.
OPERATE System is running. Purified water can be delivered. Resistivity
19.8 MΩ.cm 22.9°C measure is not compensated at 25 °C. Water resistivity and
temperature are displayed permanently.
Cleaning ________________________________________________
The exterior of the Simplicity may be cleaned using a soft cloth dampened with a mild detergent.
Prior to cleaning assure that the system main AC power has been disconnected.
System maintenance messages _____________________________
See section “Troubleshooting” pages 26 and 27.
STANDARD OPERATING OF THE SIMPLICITY __________________

Millipore Simplicity Specifications

General

Brand	Millipore
Model	Simplicity
Category	Water Filtration Systems
Language	English