Page 25/36
Page 25/36
Page 25/36
Shutting down the system for an extended period of time ______
Keep the Simplicity in STANDBY mode when water is not needed
for a few days. In this mode, the unit will operate all cycles to keep
the water quality optimum.
If the Simplicity is to be shut down for a long time, drain the
reservoir, remove the SimPak and Simfilter, and unplug the system.
Upon start-up, new cartridges should be installed. For further
information, please contact Millipore Technical Service.
_________________________________________ MAINTENANCE
Shutting down the system for an extended period of time ______
Keep the Simplicity in STANDBY mode when water is not needed
for a few days. In this mode, the unit will operate all cycles to keep
the water quality optimum.
If the Simplicity is to be shut down for a long time, drain the
reservoir, remove the SimPak and Simfilter, and unplug the system.
Upon start-up, new cartridges should be installed. For further
information, please contact Millipore Technical Service.
_________________________________________ MAINTENANCE
Shutting down the system for an extended period of time ______
Keep the Simplicity in STANDBY mode when water is not needed
for a few days. In this mode, the unit will operate all cycles to keep
the water quality optimum.
If the Simplicity is to be shut down for a long time, drain the
reservoir, remove the SimPak and Simfilter, and unplug the system.
Upon start-up, new cartridges should be installed. For further
information, please contact Millipore Technical Service.
_________________________________________ MAINTENANCE
To Next Page
Loading...
