59
Detect operation
1
Scan in the B direction (plus direction)
to detect the line.
• The buzzer sounds when the line is
detected. If the line is not detected, the
buzzer does not sound.
2
Scan in the B direction (minus
direction) to detect the line.
3
Scan in the A direction (plus direction)
to detect the line.
4
Scan in the A direction (minus
direction) to detect the line.
5
Follow the Steps 1 to 4, and confirm if
the buzzer sounds 4 times.
• When the detection behavior completes
successfully, the buzzer sounds 4 times.
• If the plotter cannot detect the line successfully
even after you adjusted the sensitivity, you must
verify the registration conditions and contact our
sales branches (for service call).
To Next Page
Loading...
