Accutorr V Operating Instructions 0070-10-0699-02 2 - 5
Controls and Indicators Front Panel
• Dark: Indicates the AC power is not connected.
15. Battery status indicator
• Illuminated: Indicates the unit is on and the battery is inserted.
• Flashes: Indicates the system is on and in low battery status.
• Dark: Indicates the battery is not inserted. The battery indicator also remains
dark when monitor power is off.
16. UP ARROW key
Moves the cursor up within the LCD display (17).
17. LCD Display
Displays startup screen, menus, trend data, PLETH waveforms, and current date and time.
18. OK key
Selects the highlighted option. In the trend view, pressing this key displays the REVIEW
SETUP dialog.
19. DOWN Arrow key
Moves the cursor down within the LCD display (17).
20. SpO
2
Connector
Used to attach an SpO
2
sensor to the Accutorr V.
21. Patient size indicator
Patient sizes include adult, pediatric, or neonate from left to right.
22. NIBP status indicator
• Illuminated: Indicates the monitor is ready to perform an NIBP measurement.
• Dark: Indicates that interval NIBP measurement is in progress or device not
ready to perform an NIBP measurement.
23. PATIENT SIZE key
Changes the patient size by cycling through adult, pediatric, and neonate. Patient size
changes only when this key is pressed and held for one second.
24. START NIBP key
Starts an NIBP measurement.
25. DEFLATE key
Stops an NIBP measurement that is in progress and deflates the cuff. Pressing this key while
in the interval mode suspends the interval mode operation until the Start NIBP key is pressed
again.
NOTE: Interval display flashes between pressing the Deflate key
and pressing the Start NIBP key.
To Next Page
Loading...
Need help?
General
