Mindray Accutorr V User Manual

Accutorr V Operating Instructions 0070-10-0699-02 3 - 47
Operation Status and Error Codes
3.17 Status and Error Codes
3.17.1 Physiological Alarm Messages
3.17.2 Technical Alarm Messages
In the following tables, XX represents a parameter module such as NIBP or SpO
2
, or a
parameter label, such as PR and SpO
2
, but not RECORDER (for RECORDER, see
Section 3.17.9). ## stands for patient category, i.e., adult, pediatric, or neonate. The
“Level” field indicates the alarm level: H means high and L means low.
ALARM MESSAGE LEVEL CAUSE ACTION
HIGH PR H PR value exceeds the upper alarm
limit.
Make sure the alarm limits
are appropriate for the
patient, and check the
patient’s condition.
LOW PR H PR value is lower than the lower
alarm limit.
HIGH SPO2 H SpO
2
value exceeds the upper
alarm limit.
Make sure the alarm limits
are appropriate for the
patient, and check the
patient’s condition.
LOW SPO2 H SpO
2
value is lower than the lower
alarm limit.
HIGH SYS H SYS value exceeds the upper alarm
limit.
Make sure the alarm limits
are appropriate for the
patient, and check the
patient’s condition.
LOW SYS H SYS value is lower than the lower
alarm limit.
HIGH DIA H DIA value exceeds the upper alarm
limit.
Make sure the alarm limits
are appropriate for the
patient, and check the
patient’s condition.
LOW DIA H DIA value is lower than the lower
alarm limit.
HIGH MAP H MAP value exceeds the upper
alarm limit.
Make sure the alarm limits
are appropriate for the
patient, and check the
patient’s condition.
LOW MAP H MAP value is lower than the lower
alarm limit.
NO PULSE H The pulse signal of the patient is so
weak that the monitor cannot
perform pulse analysis.
Check the connection of
the sensor and the
patient’s condition.
The alarm levels are H = high and L = low.

Mindray Accutorr V Specifications

General

Brand	Mindray
Model	Accutorr V
Category	Medical Equipment
Language	English