Introduction Controls and Indicators
2 - 2 0070-10-0699-02 Accutorr V Operating Instructions
2.1 Introduction
This section of the Operating Instructions identifies and describes each control and display of
the Accutorr V. For step-by-step operating instructions, see Chapter 3.0.
The following is a list of all controls, connectors, and indicators, their item numbers and the
page numbers. The item number refers to the call-outs on the drawings within this chapter.
The page number refers to the page where the item description is found.
FRONT PANEL PAGE FRONT PANEL PAGE
1. Alarm lamp 2-3 25. DEFLATE key 2-5
2. Systolic pressure (SYS) 2-4 26. INTERVAL key 2-6
3. Mean pressure (MAP) 2-4 27. NIBP Interval indicator 2-6
4. Diastolic pressure (DIA) 2-4 28. Pulse strength indicator 2-6
5. Pulse Rate (PR) Source indicator 2-4 29. SILENCE key 2-6
6. Pulse rate (PR) 2-4 30. Silence indicator 2-6
7. Oxygen saturation (SpO2) 2-4 31. Temperature site 2-6
8. Temperature (Temp) 2-4 32. Temperature Unit indicator 2-6
9. PATIENT INFO key 2-4 33. PRINT key 2-6
10. SET ALARMS key 2-4 34. NIBP connector 2-6
11. DISPLAY key 2-4 REAR PANEL
12. MENU key 2-4 35. TEMP probe sheath 2-7
13. ON/STANDBY key/indicator 2-4 36. TEMP probe covers 2-7
14. AC power indicator 2-4 37. TEMP probe connector 2-7
15. Battery status indicator 2-5 38. RS-232 connector 2-7
16. UP ARROW key 2-5 39. Nurse call connector 2-7
17. LCD Display 2-5 40. Network connector 2-8
18. OK key 2-5 41. Equipotential grounding connector 2-8
19. DOWN Arrow key 2-5 42. AC power input connector 2-8
20. SpO2 Connector 2-5 RECORDER MODULE
21. Patient size indicator 2-5 43. Paper outlet 2-8
22. NIBP status indicator 2-5 44. Recorder door 2-8
23. PATIENT SIZE key 2-5 45.
Power indicator 2-8
24. START NIBP key 2-5 46. Recorder door latch 2-8
To Next Page
Loading...
