Mindray Accutorr V - Resetting the NIBP

Resetting the NIBP User Maintenance
4 - 10 0070-10-0699-02 Accutorr V Operating Instructions
4.8 Resetting the NIBP
To reset the NIBP:
1. Press (12) to display the SYSTEM SETUP dialog as shown in FIGURE 4-4.
2. Press (16) or (19) to highlight MAINTENANCE.
FIGURE 4-4 SYSTEM SETUP Dialog
3. Once MAINTENANCE is highlighted, press (18) to display the MAINTENANCE
dialog as shown in FIGURE 4-5.
FIGURE 4-5 MAINTENANCE dialog
4. Press (16) or (19) to highlight NIBP TOOLS to display the NIBP TOOLS
dialog as shown in FIGURE 4-6.
5. Once NIBP TOOLS is highlighted, press (18) to display the NIBP TOOLS dialog.
FIGURE 4-6 NIBP TOOLS Dialog