Accutorr V Operating Instructions 0070-10-0699-02 4 - 11
User Maintenance Resetting the NIBP
NOTE: The ACCURACY TEST, LEAK TEST, and CALIBRATION selections
shown the NIBP TOOLS dialog (FIGURE 4-6) are explained in
the Service Manual, part number 0070-10-0702. Calibration
should be carried out by qualified personnel only.
6. Press (16) or (19) to highlight NIBP RESET to display the INITIAL
PRESSURE dialog as shown in FIGURE 4-6.
7. Once NIBP RESET is highlighted, press (18) reset the NIBP. While the NIBP is
setting, the prompt message “RESETTING…
” displays.
To Next Page
Loading...
