Creating a User Configuration Operation
3 - 42 0070-10-0699-02 Accutorr V Operating Instructions
3.16 Creating a User Configuration
The operator can set custom default settings. Each time the Accutorr V is turned on, it will use
the User Configuration (custom default settings).
To create a User Configuration:
1. Press (12) to display the SYSTEM SETUP dialog FIGURE 3-7.
2. Press (16) or (19) to select MAINTENANCE.
3. Once the MAINTENANCE is highlighted, press (18) to display the
MAINTENANCE dialog as shown in FIGURE 3-26.
FIGURE 3-26 MAINTENANCE Dialog
4. Press (16) or (19) to select USER MAINTENANCE.
5. Once USER MAINTENANCE is highlighted, press (18) to display the Enter
Password dialog, as shown in FIGURE 3-27.
FIGURE 3-27 ENTER PASSWORD Dialog
To Next Page
Loading...
