Mindray Accutorr V - Decontamination of the Optional Smartemp TEMP Probe

Decontamination of the Optional SmarTemp
™
TEMP Probe User Maintenance
4 - 4 0070-10-0699-02 Accutorr V Operating Instructions
4.3 Decontamination of the Optional SmarTemp
™
TEMP
Probe
WARNING: Perform the decontamination or cleaning process with the
unit powered down and power cord removed.
Use LpH SE Germicidal detergent to decontaminate a probe that has come in contact with a
biological material. Apply a small amount of detergent to a disposable wipe (paper based)
and wipe down the outside of the probe. Discard the wipe appropriately. After waiting 10
minutes, use a clean dry wipe to dry the probe.