Mindray BeneLink - Output Signals - Waveforms (for Benevision N Series Monitors Only)

4-24 BeneLink Module Operator’s Manual
Monitor output: alarms from Draeger Evita2 duraEvita 4/Evita XL Ventilator
Priority Label
Medium
Medium
Technical
alarms
If the monitor shows the alarm [Medium Technical
alarms], the external device has one or more of the
following alarms:
BAT T. < 2M IN
CHECK EVITA
EVITA STDBY
AMB PRESS ?
NEBULIZ OFF
ERR MULTIPCB
Low
Battery in Use
Low
Technical
alarms
If the monitor shows the alarm [Low Technical
alarms], the external device has one or more of the
following alarms:
CO2 ERR
CO2 SENSOR ?
MIXER INOP
SYNCHRO INOP
INSPHOLD END
EXSPHOLD END
4.6.3 Output Signals - Waveforms (For BeneVision N Series
Monitors only)
The following waveforms from the external device can be output to the monitor:
 Paw
 Flow
 Volume
 CO2