Mindray BeneLink - 2.4 Supported Devices

2-2 BeneLink Module Operator’s Manual
2.3 Data transmission
The Benelink module is connected with external devices via the serial ports (physical
interfaces are RJ45 connectors). You can simultaneously connect up to four external
devices via one BeneLink module. Parameters, alarm data from the external devices
can be output. For BeneVision N Series monitors, respiratory waveforms and loops
from the external devices can also be output. BeneVision N Series monitors can
output the parameter measurements, alarm limit settings, and alarm status to
external devices via the DIAP protocol (Datascope Improved ASCII Protocol).
2.4 Supported Devices
Please contact Mindray service personnel for the most recent information on the
supported devices.
2.4.1 Supported Anesthesia Machines
Brand Model ID for ID
adapter
Type of serial port
adapting cable
Draeger Apollo 444FBBB1 Type C
Fabius GS 4446BBBA Type C
Fabius Tiro 4446BBBA Type C
Perseus A500 4435BBCB None needed
GE Aestiva 7900/7100 4F37B0C9 Type D
Aespire 7900/7100 (for
BeneVision N Series only)
4F37B0C9 Type D
Aespire View (for
BeneVision N Series only)
4145bebb Type D
Aisys 4F41B0BF Type D
Aisys CS2 (for BeneVision N
Series only)
4F41B0BF Type D