Mindray BeneLink - Philips Respironics V60 (SNDA Protocol); Output Signals - Parameters

4-80 BeneLink Module Operator’s Manual
Monitor output: alarms from Newport E360 Ventilator
Priority Label
Low
Low
Technical
alarms
Flow Trigger Out of Range
CPM Blinking
EXH. VALVE CAL. Failed: Prox < 1
EXH. VALVE CAL. Failed: Prox > 0.5
EXH. VALVE CAL. Failed: Prox Low
EXH. VALVE CAL. Failed: Flow < 1
LEAK TEST Leak Test Failed
Tinsp too Long
Battery in Use
4.18 Philips Respironics V60 (SNDA Protocol)
4.18.1 Output Signals – Parameters
Monitor output: parameters from Philips Respironics V60 (SNDA Protocol) Ventilator
Label Description Trend, record, print
Monitoring Parameters
ftot Total breath rate Yes
VTe Expiratory tidal volume Yes
MV Minute volume Yes
Ppeak Peak pressure Yes
Setting Parameters
f Breath rate No
O2% Oxygen concentration Yes
PEEP Positive end-expiratory pressure No
Psupp Pressure support level No
Pinsp Pressure control level of inspiration No
Tinsp Time of inspiration No