Mindray BeneLink - Setting the Serial Ports of the Tcgas Monitoring Devices

BeneLink Module Operator’s Manual 9-7
9.3.3 Setting the Serial Ports of the TcGas Monitoring Devices
Brand Model Protocol Baud
Rate
Data
Bits
Stop
Bits
Parity Remark
Radiometer TCM
Tosca/CombiM
/TCM4/TCM40
MonLink 9600 8 1 Even
Setup(PW: 19100) → Techsettings →
Continuous data output: MonLink
You need also the serial interface
adapter with cable from Radiometer.
(SN: 636-649)
SenTec SenTec Digital
Monitor)
SenTecLink 115200 / / /
Interfaces → Serial Interface →
Protocol: SenTecLink