Mindray BeneLink - Output Signals - Waveforms (for Benevision N Series Only); Output Signals - Loops (for Benevision N Series Only)

4-70 BeneLink Module Operator’s Manual
Monitor output: alarms from MAQUET SERVO-i/SERVO-s Ventilator
Priority Label
Low
Low
Technical
alarms
alarms], the external device may have the following
alarms:
Leakage fraction too high
4.15.3 Output Signals – Waveforms (For BeneVision N Series Only)
The following waveforms from the external device can be output to the monitor:
 Paw
 Flow
 Volume
 CO2
4.15.4 Output Signals - Loops (For BeneVision N Series Only)
The following respiration loops from the external device can be output to the
monitor:
 PV Loop
 FV Loop
 PF Loop