Mindray BeneLink User Manual

BeneLink Module Operator’s Manual 4-69
Monitor output: alarms from MAQUET SERVO-i/SERVO-s Ventilator
Priority Label
Hi
gh
High
Technical
alarms
Range Switch error
Mode Switch error
Barometer error
High continuous pressure
Overrange
Computer Interface Emulator hardware error
NIV,Leakage out of range
NIV,Time in waiting position exceeds 2 min
regulation pressure limited
NIV,No patient effort detected
Unreliable Edi signal
Check catheterposition/Edi invalid
No consistent patient effort
Check catheter position/RR and HR coupling
Medium
Medium
Technical
alarms
If the monitor shows the alarm [Medium Technical
alarms], the external device has one or more of the
following alarms:
Panel Interface uP Module error
Exp.flow &CO2 linearization uP Module error
Alarm buff
CI Battery Voltage
Pneumatic-Edi out of synch
Edi activity low
No Edi signal detected
Unsuccessful manual gas change alarm
Check Heliox adapter
Low
Check tubing
If the monitor shows the alarm [Low Technical

Mindray BeneLink Specifications

General

Brand	Mindray
Model	BeneLink
Category	Control Unit
Language	English