Mindray BeneLink - Output Signals - Alarms

BeneLink Module Operator’s Manual 3-29
3.6.2 Output Signals – Alarms
Monitor output: alarms from GE Aisys/Aisys CS2/Avance anesthesia machine
Priority Label
Physiological alarms
High
Paw High
Paw Low
Volume Apnea > 2 min
Me
dium
Sub-Atmospheric Paw
MV Low
MV High
VTe Low
VTe High
Volume Apnea
Low Pressure Limiting
Technical alarms
High
No Fresh Gas
O2 Supply Failure
Circuit Occluded
High
Technical
alarms
If the monitor shows the alarm [High Technical
alarms], the external device has one or more of the
following alarms:
Other Priority Alarms
Medium
Patient Circuit Leak
Medium
Technical
alarms
If the monitor shows the alarm [Medium Technical
alarms], the external device has one or more of the
following alarms:
High Circuit O2
Low Circuit O2
No O2 Cell Sensor
No Pressure Cntrl/PEEP