Mindray BeneLink - Output Signals - Alarms

BeneLink Module Operator’s Manual 3-21
3.4.2 Output Signals – Alarms
Monitor output: alarms from GE Aespire 7900&7100/Aestiva 7900&7100 anesthesia
machine
Priority Label
Physiological alarms
High
FiO2 Low
Paw High
Paw Low
High Paw Sustained
Volume Apnea > 2 min
Medium
FiO2 High
Sub-Atmospheric Paw
MV Low
MV High
VTe Low
VTe High
Volume Apnea
Low Pressure limiting
Technical alarms
Hi
gh
No
Fresh Gas
O2 Supply Failure
Hi
gh
Technical
alarms
If the monitor shows the alarm [High Technical
alarms], the external device has one or more of the
following alarms:
Pinspired Not Achieved
Inspiration Stopped
+15V SIB Out-of-Range
+15V Manifold Out-of-Range
Display Voltage Out-of-Range
Vaux_ref Out-of-Range