Mindray BeneLink - Output Signals - Waveforms (for Benevision N Series Patient Monitor Only); Output Signals - Respiratory Loops; Monitor Only); Output Signals-Alarms

BeneLink Module Operator’s Manual 4-37
4.9.2 Output Signals – WaveForms (For BeneVision N Series
Patient Monitor Only)
The following waveforms from the external device can be output to the monitor:
 Paw
 Flow
 Volume
 CO2
4.9.3 Output Signals – Respiratory Loops (For BeneVision N Series
Patient Monitor Only)
The following respiration loops from the external device can be output to the
monitor:
 PV Loop
 FV Loop
 PF Loop
4.9.4 Output Signals—Alarms
Monitor output: alarms from GE Carescape R860 Ventilator
Priority Label
Physiological alarms
High
Apnea
AW-TEMP HIGH
FiO2 High
FiO2 Low
MV High
MV Low
Ppeak High