10-8 BeneLink Module Operator’s Manual
Alarm ID Alarm message Category Alarm priority Source
0xA6B7 O2 cell cal Needed Tech High Vent
0xA6B8 Circuit Disconnect Tech High Vent
0xA6B9 Power Failure Tech High Vent
0xA6BA Tinsp Short Tech High Vent
0xA6BB FiO2 Sensor
Disconnected
Tech Medium Vent
0xA6BC High Technical Alarm Tech High Vent
0xA6BD Medium Technical
Alarm
Tech Medium Vent
0xA6BE Low Technical Alarm Tech Low Vent
0xA6BF Prompt Tech Prompt Vent
0xA6C0 PEEP Low Phys High Vent
0xA6C1 FiO2 Alarm Phys High Vent
0xA96E High DCO2 Tech Medium Vent
0xA96F Low DCO2 Tech Medium Vent
10.3 Alarm IDs of the Pulse CO-Oximeter
Alarm ID Alarm message Category Alarm priority Source
0xA6D6 No Cable Connected Tech High SpO2
0xA6D7 Cable Life Expired Tech Low SpO2
0xA6D8 Incompatible Cable Tech Medium SpO2
0xA6D9 Unrecognized Cable Tech Medium SpO2
0xA6DA Defective Cable Tech Medium SpO2
0xA6DB
Cable Life Near
Expiration
Tech
Low SpO2
0xA6DC No Sensor Connected Tech High SpO2
To Next Page
Loading...