BeneLink Module Operator’s Manual 10-7
Alarm ID Alarm message Category Alarm priority Source
0xA6A2 Neo Flow Sensor Error Tech High Vent
0xA6A3 O2 and air supply Tech Medium Vent
0xA6A4 O2 and heliox supply Tech Medium Vent
0xA6A5 Sustained Airway
Pressure
Tech High Vent
0xA6A6 Insp gas temperature
high
Tech High Vent
0xA6A7 Tinsp Long Tech Low Vent
0xA6A8 CO2 No Watertrap Tech Low Vent
0xA6A9 No VO2, High FiN2O Tech High Vent
0xA6AA No O2 Pressure Tech High Vent
0xA6AB No Fresh Gas Flow Tech High Vent
0xA6AC No VO2, FiO2 > 85% Tech High Vent
0xA6AD MGAS Replace Water
Trap
Tech High Vent
0xA6AE 12 Hour Test Tech Low Vent
0xA6AF Patient Connected? Tech High Vent
0xA6B0 Negative Airway
Pressure
Tech High Vent
0xA6B1 Circuit Leak Tech High Vent
0xA6B2 Patient Connection
Leak
Tech High Vent
0xA6B3 Patient Disconnected Tech High Vent
0xA6B4 O2 cell disconnect Tech High Vent
0xA6B5 Check tubing Tech Low Vent
0xA6B6 Disconnection
ventilator side
Tech High Vent
To Next Page
Loading...