Mindray BeneLink - Puritan Bennett PB840;PB980 (SNDF Protocol); Output Signals

To Next Page

To Previous Page

4-84 BeneLink Module Operator’s Manual

4.20 Puritan Bennett PB840/PB980 (SNDF Protocol)

4.20.1 Output Signals – Parameters

Monitor output: parameters from Puritan Bennett PB840/PB980 (SNDF Protocol)

Ventilator

Label Description Trend, record, print

Monitoring Parameters

O2% Oxygen concentration Yes

PEEP Positive end-expiratory pressure Yes

Ppeak Peak pressure Yes

Pplat Plateau pressure Yes

Pmean Mean pressure Yes

VTe Expiratory tidal volume Yes

VTi Inspired tidal volume Yes

VTe spn Spontaneous expiratory tidal volume Yes

MVspn Spontaneous breathed minute volume Yes

MVe Expiratory minute volume Yes

ftot Total respiratory rate Yes

fapnea Breath rate for apnea ventilation No

f Breath rate No

I:E Inspiratory time: Expiratory time ratio No

MVLEAK Leakage minute volume No

Leak Comp Leak compensation No

Rstat Static lung resistance Yes

Rdyn Dynamic lung resistance Yes

Cstat Static compliance Yes

Cdyn Dynamic compliance Yes

RSBI Rapid shallow breathing index Yes

WOB Work of breathing Yes

NIF Negative inspiratory force No

Mindray BeneLink - Puritan Bennett PB840;PB980 (SNDF Protocol); Output Signals - Parameters