BeneLink Module Operator’s Manual 4-83
Monitor output: alarms from Philips Respironics V60 (VRPT Protocol) Ventilator
Priority Label
Technical alarms
High
O2 Supply Pressure Low
Patient Disconnect
High
Technical
alarms
If the monitor shows the alarm [High Technical
alarms], the external device has one or more of the
following alarms:
Low internal battery alarm status
Primary alarm failure
Air source fault alarm status
O2 valve stuck closed alarm status
Airway Obstructed?
Check Expiration-Valve
Medium
Medium
Technical
alarms
If the monitor shows the alarm [Medium Technical
alarms], the external device has one or more of the
alarm: High enclosure temperature.
Low
Airway Leak?
Low
Technical
alarms
If the monitor shows the alarm [Low Technical
alarms], the external device has one or more of the
alarm: Nonvolatile memory failure.
To Next Page
Loading...