Mindray BeneLink - Maquet Servo-U;Servo-N; Output Signals-Parameters

To Next Page

To Previous Page

BeneLink Module Operator’s Manual 4-71

4.16 MAQUET SERVO-U/SERVO-N

NOTE

 Only the Benevision N series monitor supports integration with the

MAQUET SERVO-N ventilator.

4.16.1 Output Signals—Parameters

Monitor output: parameters from MAQUET SERVO-U/SERVO-N Ventilator

Label Description Trend, record, print

Monitoring Parameters

O2% Oxygen concentration Yes

PEEP Positive end-expiratory pressure Yes

Ppeak Peak pressure Yes

Pplat Plateau pressure Yes

Pmean Mean pressure Yes

VTe Expiratory tidal volume Yes

VTi Inspired tidal volume Yes

VT/kg TVe/IBW No

MVe Expiratory minute volume Yes

MVi Inspiratory mimute volume Yes

MVspn Spontaneous breathed minute volume Yes

ftot Total respiratory rate Yes

fspn Spontaneous respiratory rate Yes

I:E Inspiratory time:Expiratory time ratio No

Ti/Ttot

Duty cycle or ratio of inspiration time

to total breathing cycle time (only during

spontaneous breathing)

Leak Comp Leak compensation No

Cstat Static compliance Yes

Cdyn Dynamic compliance Yes