BeneLink Module Operator’s Manual 9-9
9.3.5 Setting the Serial Ports of Other External Devices
Brand Model Protocol Baud
Rate
Data
Bits
Stop
Bits
Parity Remark
Masimo/ pulse
CO-oximeter
Radical 7 IAP 9600 8 1 / Method 1: Connecting Radical 7 via Docking
Station: Main Menu → Device Settings
→Device output→Serial : IAP
Connecting Radical 7 via Root:
Step1: Main Menu → Device Settings →
Device Output→ IAP
Step2: Main Menu → Device Settings →
Access Control(PW:6274) Output→ set USB
Port to 1 or 2,, baudrate to 9600
Organon/ NMT
monitoring
device
TOF-Watch
SX
/ 19200 8 1 None No Need to set.
The serial interface adapter with cable from
Organon is required.
To Next Page
Loading...