Mindray BeneLink - Interfacing with External Devices

BeneLink Module Operator’s Manual 2-1
2 Interfacing with External Devices
2.1 BeneLink Introduction
BeneLink module is intended for connecting external devices, such as ventilators and
anesthesia machines, to the BeneVision N Series monitors or Passport 12m/17m
monitors. It allows information (patient data, alarms, etc.) from external devices to be
displayed, saved, recorded, or printed through the monitor. If the monitor is
connected with the central monitoring system (CMS) or eGateway, information from
external devices can also be transmitted to the CMS or eGateway.
2.2 Physical Specifications
The physical specifications of the BeneLink module are as follows:
 Size：136.5×40×102 mm
 weight：0.35 kg