Mindray BeneLink - Philips Respironics V60 (VRPT Protocol); Output Signals - Parameters; Output Signals - Alarms

4-82 BeneLink Module Operator’s Manual
4.19 Philips Respironics V60 (VRPT Protocol)
4.19.1 Output Signals – Parameters
Monitor output: parameters from Philips Respironics V60 (VRPT Protocol) Ventilator
Label Description Trend, record, print
Monitoring Parameters
ftot Total breath rate Yes
VTe Expiratory tidal volume Yes
Ppeak Peak pressure Yes
MVe Expiratory minute volume Yes
MVLEAK Leakage minute volume No
Ti/Ttot Oxygen concentration No
Setting Parameters
f Breath rate No
O2% Oxygen concentration No
PEEP Positive end-expiratory pressure No
Pinsp Pressure control level of inspiration No
Tinsp Time of inspiration No
4.19.2 Output Signals – Alarms
Monitor output: alarms from Philips Respironics V60 (VRPT Protocol) Ventilator
Priority Label
Physiological alarms
High
Paw Low
Paw High
MV Low
PEEP Low
Medium
RR High
RR Low
VTe Low