4-46 BeneLink Module Operator’s Manual
Technical alarms
High
Air Supply Pressure Low
O2 Supply Pressure Low
No Gas Supply Pressure
Airway Obstructed？
Check Flow Sensors
Neo Flow Sensor Error
Patient Connected？
Negative Airway Pressure
Circuit Leak
Patient Connection Leak
Patient Disconnected
High
Technical
Alarm
If the monitor shows the alarm [High Technical
alarms], the external device has one or more of the
following alarms: temp high shutdown possible
primary audio failure
Neo Flow Sendor Reversed
Clean Neo Flow Sensor
Replace Neo Flow Sensor
Neo Flow Sensor Off
No Expiratory Flow Sensor
No Neo Flow Sensor
Air Supply Pressure High
O2 Supply Pressure High
FiO2 Control Error
Volume Delivery Error
Air Temp Sensor Error
O2 Temp Sensor Error
Mixed Gas Temp Sensor Error
Total Flow Sensor Communication Failure
To Next Page
Loading...