BeneLink Module Operator’s Manual 9-5
Brand Model Protocol Baud
Rate
Data
Bits
Stop
Bits
Parity Remark
Medibus X
GE Carescape R860 / 19200 7 1 Odd No need to set
Engström
(Carestation)
/ 19200 7 1 Odd No need to set
Hamilton C1/C2/C3/T1 Polling 9600 7 2 Even
System → General → More →
RS232
G5 Block 38400 8 1 None Enter the Configuration menu.
G5 Polling 9600 7 2 Even Enter the Configuration menu.
Galileo Polling 9600 7 2 Even 1. Enter the Standby mode.
2. Press and hold hard keys “O2 ICON”
and “Lung ICON”, “Lock/Unlock ICON”
and “On/Off ICON”.
3. Select Configuration → Interface.
4. Set com1/2 to Hamilton C5/Polling.
MAQUET SERVO-i/SERVO-s / 9600 8 1 Even No need to set
SERVO-U/SERVO-
N
/ 38400 8 1 Even No need to set
To Next Page