BeneLink Module Operator’s Manual 3-23
Monitor output: alarms from GE Aespire 7900&7100/Aestiva 7900&7100 anesthesia
machine
Priority Label
Me
dium
Me
dium
Technical
alarms
Memory (redundant storage) Fail
No Battery
Low Battery Charge
Low VE Limit Set.
Low
Battery in Use
Low
Technical
alarms
If the monitor shows the alarm [Low Technical
alarms], the external device has one or more of the
following alarms:
Check O2 Sensor
O2 Calibration Error
PEEP Not Achieved
Vt Not Achieved
No Inspiratory Flow Sensor
No Expiratory Flow Sensor
Insp Vt/Vte Mismatch
Vdel Mismatch
Bellows Empty
+Vanalog Failure
-Vanalog Failure
Flow Sensor Cal Data Corrupt
Low Battery
Low Battery (shutdown)
Battery Voltage Out Of Range
Battery Current Out Of Range
Circuit Auxiliary
Auxiliary Breathing Circuit
Service Calibrations Due
To Next Page
Loading...