3-42 BeneLink Module Operator’s Manual
Monitor output: alarms from Mindray A7/A5/A4/A3 anesthesia machine
Priority Label
Me
dium
Medium
Technical
alarms
If the monitor shows the alarm [Medium Technical
alarms], the external device has one or more of the
following alarms:
PEEP Valve Failure
Insp Valve Failure
ACGO 3-way Valve Failure
Replace O2 Sensor
Battery Undetected
IP Address Conflict
Pressure Monitoring Channel Failure
Ventilator System Comm Stop
CO2 Absorber Disconnected
Electronic Flow Control Error
Backup Flow Control Retraction Failure
Air Supply Failure
N2O not detected
Backup Flow Control Valves Open
Total Flow Sensor Self Test Time Out
Backup Flow Control Error
PEEP Safety Valve Failure
Insp Reverse Flow
Exp Reverse Flow
ACGO On
TVe Below Control Range
Key Error
O2 Flush Failure
To Next Page
Loading...
Need help?
General