5 Exam Preparation
Operator’s Manual 5 - 3
3. Search for patient information.
a. Select [Search Options] to set up search options.
The search options include Search Field, Exam Date, Exam Type, Gender, and DOB.
b. Enter the keyword corresponding to the search type in the search box. The system will
display all exam records immediately.
4. Select the desired patient information in the list, and the system pops up the shortcut menu.
5. Click [New Exam] to enter the Patient Info screen.
The corresponding patient information is also imported to the new exam simultaneously. After
editing the patient information in the Patient Info screen, select [OK] to start a new exam.
WorkList
Configure DICOM Basic and DICOM WorkList first.
Click [Worklist] in the “Patient Info” screen to query or import the patient data.
5.2 Select Exam Mode and Probe
If the exam mode is changed during a measurement, all measurement calipers on the image will be
cleared. The data of general measurements will be lost, but the data of application measurements
will be stored in the reports.
1. Connect proper probes to the system, and tap [Probe] on the touch screen.
2. Tap to select the probe type and exam mode, and the system exits the dialogue box to enter the
selected exam mode and probe.
Quickly switch to recently used probes and exam modes
The recently used probes and exam modes are displayed on the right side of the touch screen. Select
an appropriate probe and exam mode for quick switch.
Review Image
Click to enter the Review screen.
Patient Info
Click to enter the Patient Info screen.
Review Report
Enter diagnostic report screen.
Delete Exam
Delete the selected record.
Backup Exam
Click to back up the selected patient record to media supported.
Restore Exam
Click to import the patient data from an external media.
Send Exam
Click to send the selected patient data to external device, storage
server or printer.
Activate Exam
Click to continue an exam that has been finished within 24 hours.
Resume Exam
Click to continue an exam that has been paused within 24 hours.
Annotation Exam Click to add annotations to the selected exam, or view the history
annotations of the selected exam.
To Next Page
Loading...
