Mindray Consona N9 - Disconnecting a Probe; Probe Adapter Installation; Connecting Peripheral Devices; Connecting USB Devices

3 System Preparation
Operator’s Manual 3 - 11
3.7.2 Disconnecting a Probe
Perform the following procedure:
1. Turn the locking switch 90° counterclockwise to the vertical position.
2. Pull the probe connector straight out vertically.
3.7.3 Probe Adapter Installation
Perform the following procedure:
1. Align the probe adapter with the probe socket and carefully push it into place.
2. Rotate the lock switch clockwise 90 ° to fix the probe adapter.
3.8 Connecting Peripheral Devices
3.8.1 Connecting USB Devices
WARNING
DO NOT directly remove a USB memory device, as the USB device and/or the
system may become damaged.
• When connecting a USB memory device to the ultrasound system via a USB port, a sound is
heard if it is connected successfully and the symbol appears in the bottom-right corner of
the screen.
• To remove the USB device: click to open the [Remove USB Device] screen. Select the
device to be removed and click [OK]. A sound is heard when removing the USB memory
device.
3.8.2 Connecting the Footswitch
WARNING
Do not connect two or more footswitches to the main unit; otherwise, it may
lead to the malfunction to the system.