2 - 18 Operator’s Manual
2 System Overview
2.12.2 Dialog Box
A dialog box screen consists of title, page tabs, contents and buttons, etc.
To reposition a dialog box
1. Use the trackball to move the cursor onto the title bar of the dialog box.
At this time the cursor becomes a , then press <Set>.
2. Use the trackball and position the rectangular graphic to the new desired location.
3. Release <Set>, and the dialog box is moved to the desired position.
2.12.3 Menu Operation
In B mode, click > [Menu] on the touch screen to display or hide the parameter menu.
Use the cursor to operate on the menu.
No.
Item Description
1. Title bar The title bar is used to give a description for the content and function
of the screen.
2. Page Tab For some screens, contents are distributed into several pages. Use
<Set> to open/close the available pages.
3. Contents • Radio box: click to select the item.
• Check box: click to check or uncheck the item.
• Entry box: enter characters manually via the keyboard.
• Drop-down list: click ▼ to show the list and select an item.
4. Controls When the operation of a screen is completed, save or cancel the
operation, and close the screen.
To Next Page
Loading...
