3 System Preparation
Operator’s Manual 3 - 13
The digital video printers that system supports consist of the B/W printers and color printers.
Perform the following procedure:
1. Connect the data cable to USB port of the ultrasound device.
2. Power on the system and the printer.
3. Add a print service:
a. In B mode, click > [Setup] on the touch screen, select [Print].
b. Click [Add Service] to enter the page.
c. Select the service type and enter the service name manually.
d. Click [OK] to return to the page.
e. Select the target printer from the drop-down list in the “Property” box and set other
printing properties.
f. Click [OK] to complete.
3.8.5 Connecting a Wireless Printer
The system supports the wireless graph/text printer for the report print.
Perform the following procedure:
1. Power on the system and the printer.
2. Make sure the ultrasound machine and the printer are connected to a same LAN, and turned on
the Wi-Fi function of the printer.
3. In B mode, click > [Setup] on the touch screen, select [Print] to choose the report to be
printed. Select the printer from the wireless printer list, and set the printer.
4. Click [Interval Time(Sec)] to exit the preset and make the settings effective.
3.8.6 iVocal
Insert the iVocal microphone device to the USB port of the ultrasound system. The system
automatically enters the following page.
No. Description
1 Click to speak to the microphone (the system recognizes the vocal order). The
system conducts the operations after recognizing the voice.
2 Click to stop the voice Recognition.
To Next Page
Loading...
