19 System Maintenance
Operator’s Manual 19 - 5
Cleaning the Ultrasound gel heater
• Clean the bottom cover of the gel heater regularly. Reinstall it to the bottom of the gel heater
after it becomes dry.
• Do not use the acetone. Do not use sharp-edged material (like steel wool) to clean the gel
heater.
• Clean the box of the gel heater regularly. Reinstall it to the bottom of the gel heater after it
becomes dry.
• Clean the Ultrasound gel heater periodically (1 time per month).
Perform the following procedure:
1. Unplug the gel heater and remove it from the gel heater bracket.
2. Use mild soap-suds or the water to clean the heater appearance and the cable.
3. Press the pad on the bottom cover to remove the bottom cover.
4. Install the bottom cover.
5. Install the gel heater back to the bracket and connect the power supply.
19.1.2 Cleaning the peripherals
Clean the peripherals periodically (1 time per month).
Do the cleaning maintenance according to your actual peripheral configuration; items which are not
configured can be skipped.
Content Description
Color and B/W video
printer
First wipe off dust or stain attached to the cover of printer with soft dry
cloth, then clean the inside of printer. Be sure to do the cleaning
maintenance according to the operation manual if necessary.
Graph / text printer First wipe off dust or stain attached to the cover of printer with soft dry
cloth, then clean the inside of printer. Be sure to do the cleaning
maintenance according to the operation manual if necessary.
To Next Page
Loading...
