7 - 6 Operator’s Manual
7 3D/4D
Move the probe across the surface.
– Rocked scanning
Rotate the probe once from the left to the right side (or from the right to the left) to include
the entire desired region.
• Scanning plane and probe movement
Move the probe across the body surface.
The arrow in the figure below indicates the movement of the probe.
You can move the probe in the opposite direction to the arrow.
7.3 Static 3D
Static 3D provides single frame image acquisition of 3D images. During the scanning; the probe
performs the scanning automatically.
7.3.1 Basic Procedures for Static 3D Imaging
Perform the following procedure:
To Next Page
Loading...
