4 Setup
Operator’s Manual 4 - 11
2. Select or deselect the check box from the privilege list.
3. Click [OK] to confirm the editing and exit the dialog box.
The edited privileges will appear in the User List.
Modify Passwords
The account password needs to be changed every 3 months.
The system administrator can modify all user passwords. The administrator password is empty by
factory default. You can set this password.
An operator can only modify his/her own password.
1. Select the user name to be modified in User List.
2. Click [Change Password] to open the dialog box.
3. Enter current password, new password and confirm new password, then click [OK].
Configure Password Policy
Turn on the access control function and log in to the system as Administrator before you configure
the password policy.
Click [Password Policy Config]:
Item Description Remark
Lockout
Threshold
Set the maximum time that a user can input
the wrong password. If you exceed the
maximum times, your account will be locked.
For example, assume that the
“Lockout Threshold” is set to
5, the “Reset Account
Lockout Threshold after” is
set to 60, and the “Lockout
Duration” is set to 60. That is,
a user inputs the wrong
password for 5 times within
60 minutes, the account is
locked, and the user can log in
to the system only after 60
minutes. Other users with
unlocked accounts can still
log in to the system normally.
Reset Account
Lockout
Threshold after
Set the duration allowed for a user to
continuously input the wrong password.
Lockout Duration Set the duration after an account is locked.
Reset all lockout Reset all locked accounts. /
To Next Page
Loading...
