Mindray DC-70 Service Manual

System Installation 3-11
8. Locate the printer driver folder by clicking “Browse” on the following dialog box.
9. Click [Next], and the prompt of successful installation is displayed as follows.
NOTE: 1.
Before adding the local printer, make sure the printer is powered on, and the printer
has been well connected with the ultrasound device (a sound feedback will be heard
when connecting)
2.
If the installation can’t be performed, then the printer can’t be supported by the
ultrasound machine.
 Print
Both report and image can be printed on a graph / text printer.
To set the default report printer and its attribute:

Mindray DC-70 Specifications

General

Power Supply	100-240V AC, 50/60Hz
Imaging Modes	B-mode, M-mode, Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Probes	Convex, Linear, Phased Array, Volume
Connectivity	USB, Ethernet, VGA
Advanced Features	3D/4D Imaging
Applications	Abdominal, Obstetrics, Gynecology, Cardiac, Small Parts, Vascular, Musculoskeletal, Urology
Weight	Approx. 85 kg
Operating System	Windows-based