Product Principle 4-19
4.6.2 Primary Display Assembly
Primary display shows the interface of ultrasound application program, including imaging area.
The specifications of DC-70 V4.0’s primary display are:
21.5 inches; resolution: 1920*1080.
Visual angle: right/left angle is equal to or larger than 85°; the top and the bottom are equal
to or larger than 85°.
Adjustable brightness and contrast: can be adjusted via keys or communication software.
Power supply: 12V±5%，3Amax.
The signal is DVI; the connector is DisplayPort (abbreviated to DP).
Display status indicator.
Two types of color temperature.
The specifications of DC-70 V4.0’s primary display are:
23.8 inches; resolution: 1920*1080.
Visual angle: right/left angle is equal to or larger than 85°; the top and the bottom are equal
to or larger than 85°.
Adjustable brightness and contrast: can be adjusted via keys or communication software.
Power supply: 12V±5%，3Amax.
The signal is DVI; the connector is DisplayPort (abbreviated to DP).
Display status indicator.
Two types of color temperature.
4.6.3 Secondary Display Assembly
The monitor shows auxiliary control interface of ultrasound application program and completes
touch control with touch screen.
The functions of DC-70 V4.0’s secondary display are:
13.3 inches; resolution: 1920*1080.
Visual angle: not mandatory. It is equal to VA screen.
Adjustable brightness and contrast: can be adjusted via communication software.
Power supply: 12V±5%，1Amax.
The signal is DVI; the connector is HDMI.
The function of DC-70 V4.0’s touch screen are:
It coordinates with display area.
Projected capacitive. Supports at least 2 touches.
Power supply and the signal uses USB 1.1 standard. Used-definition of the connector.
Anti-glare.
To Next Page
Loading...
Need help?
General
