Mindray DC-70 Service Manual

System Installation 3-19
NOTE: Please do not switch [Disable Wifi]/[Enable Wifi] frequently. If [Start]/[Stop] button become
available after frequent switching or the DC-70 can no longer search any other hotspots,
please click [Disable Wifi] again and then click [Enable Wifi] to see if it works.
3.5.6 Network Configuration
 TCP/IP setting
Click the network icon in the bottom-right corner of the screen (including wireless connection icon
and wired connection icon ) to enter TCP/IP setting:
a) Click [IP Config] to open the page:
b) Select “DHCP”, and then click [OK].

Mindray DC-70 Specifications

General

Power Supply	100-240V AC, 50/60Hz
Imaging Modes	B-mode, M-mode, Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Probes	Convex, Linear, Phased Array, Volume
Connectivity	USB, Ethernet, VGA
Advanced Features	3D/4D Imaging
Applications	Abdominal, Obstetrics, Gynecology, Cardiac, Small Parts, Vascular, Musculoskeletal, Urology
Weight	Approx. 85 kg
Operating System	Windows-based