Mindray DC-70 Service Manual

System Installation 3-23
NOTE:
Only if DICOM basic option is configured, Worklist page is available.
3.5.9 Check System Information
In System Information screen, it displays the product configuration, the optional installation status,
software version, hardware & boards, and driver related information. You can check the product
information here.
1. Press <Setup>, and then click [System Info] to open the following screen.
2. Log on as service. On About Detail page, system hardware & board related information can be
seen.
NOTE:
1. Be sure to confirm the system information before and after the software
maintenance.
2.
If necessary, please ask the user to save the current system information.

Mindray DC-70 Specifications

General

Power Supply	100-240V AC, 50/60Hz
Imaging Modes	B-mode, M-mode, Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Probes	Convex, Linear, Phased Array, Volume
Connectivity	USB, Ethernet, VGA
Advanced Features	3D/4D Imaging
Applications	Abdominal, Obstetrics, Gynecology, Cardiac, Small Parts, Vascular, Musculoskeletal, Urology
Weight	Approx. 85 kg
Operating System	Windows-based