22
Service Manual Combics
t Close the menu access switch.
Slide the menu access switch to the right ("closed position").
ADC Quick Configuration for Combics 1 and 2
There is a quick installation option available when connecting a weighing platform
(WP 1 or WP2) to a Combics 1 or 2
Open the menu access switch
t Remove the cap that covers the menu access switch on the back of the indicator
t Slide the switch to the left (= "open position")
y The device is now in "STANDBY" mode.
t Turn on the device with the e key.
y All segments light up in the display.
t While all segments are lit, press the ( key.
Operating Design | Service Mode Combics | 1 | 2 ADC configuration
To Next Page
Loading...
