6. Operating | 6.2 - Configuration and adjustment via the keypad | 101
A weight value for the dead load appears on the display.
25. Press "OK".
The dead load is set. 00000.0kg appears on the display.
Defining the Span (Cd 004)
26. Press "OK".
Cd 004 appears on the display.
27. Press "OK".
SPAn appears on the display.
28. Press "OK".
byLoAd (range with weights) appears on the display.
29. If necessary, press to select byMV-V (mV/V input).
Calculating Span
Span indicates the equivalent input voltage in mV/V related to the
maximum capacity (Max) of the scale. It is calculated as follows:
Span [mV/V]= max. capacity (Max) × load cell sensitivity C
n
[mV/V]/ load
cell capacity (max. capacity E
max
× number of load cells)
Load cell sensitivity C
n
= rated output C
n
(see technical data for the load
cell).
Continue for "range with weights":
30. Press "OK".
LoAd appears on the display.
31. Position the calibration weight.
32. Press "OK".
A weight value that has not yet been calibrated appears on the
display.
33. Press "OK".
WEIGHt appears on the display.
34. Press "OK".
The max. test weight of 00600.0kg appears on the display.
35. Use the cursor keys to set the calibration weight value.
36. Press "OK".
To Next Page
Loading...
