p. 65
101
Shutter FX
Volume
The volume of the audio signals and sound effects can be increased or decreased in the custom
1section of the setup menu (p. 96). This affects the camera’s audio signals only and will not change
the playback levels of an audio track.
When the shutter is released, a shutter sound effect will
give a positive confirmation of the operation. The sound
effect can be turn off in the custom 1 section of the setup
menu (p. 96). Two shutter effects are available; signal 1 is
mechanical and signal 2 is electrical. The mechanical shut-
ter sound was taken from the legendary Minolta CLE, a
compact rangefinder that represents the pinnacle of the
development of the Leitz-Minolta CL.
Reset default
This function affects all modes. When selected, a confirmation screen will appear; choosing “Yes”
resets the following functions and settings, “No” cancels the operation.
Image quality
Image size
Drive mode
Flash mode
Full-time AF
Standard
2272 X 1704
Single-frame advance
Autoflash
Off (Multi-function recording mode)
p. 58
p. 64
Exposure mode
Focus mode
Digital zoom
Program
Area AF with single-shot AF*
Off p. 49
p. 40
p. 32
p. 46
p. 46
To Next Page
Loading...
Need help?
General
