108
DATA -TRANSFER MODE
The driver needs only to be installed once. If the driver cannot be installed automatically, it can be
installed manually with the operating system’s add-new-hardware wizard; see the instructions on the
following page. During installation, if the operating system requests the Windows 98 CD-ROM, inset it
into the CD-ROM drive and follow the accompanying instructions on the screen.
Before connecting the camera to the com-
puter, place the DiMAGE software CD-
ROM in the CD-ROM drive. The DiMAGE
installer menu should automatically acti-
vate. To automatically install the Windows
98 USB driver, click on the starting-up-
the-USB-device-driver-installer button. A
window will appear to confirm that the dri-
ver should be installed; click “Yes” to con-
tinue.
When the driver has been successfully
installed, a window will appear. Click “OK.”
Restart the computer before connecting
the camera (p.
106).
Automatic Installation
Connecting to Windows 98 and 98SE
To Next Page
Loading...
