94
View images as described in the playback section.
Viewing images on a television
It is possible to view camera images on your television. The camera has a video-out terminal to make
the connection using the supplied AV cable. The camera is compatible with the NTSC and PAL stan-
dards. The video-output setting can be checked and set in the custom 2 section of the setup menu
(p. 96).
Turn off the television and the camera.
Insert the mini-plug end of the AV cable into the camera’s
AV-out terminal.
Plug the other end of the AV cable into the video and
audio input terminals on the television.
• The yellow plug is for the video output. The white plug is
for the monaural audio output.
Turn the television on.
Turn the camera’s mode dial to the playback position.
• The camera’s monitors will not activate when the
camera is attached to a television. The playback-mode
display will be visible on the television screen.
Change the television to the video channel.
2
1.
2.
3.
4.
5.
6.
7.
3
PLAYBACK MODE
To Next Page
Loading...
Need help?
General
