70
The date of recording can be printed directly on the image. The imprint-
ing function must be activated before the image is taken. Once activat-
ed, the date will continue to be imprinted until the function is reset; a
yellow bar is displayed behind the frame counter on the monitor to indi-
cate the imprinting function is active. Date imprinting is activated with
the custom 2 section of the multi-function recording menu (p. 56).
The date is imprinted in the lower right corner of
the image when viewed horizontally. It is printed
directly on the photograph writing over the image
information. The date can be imprinted in three for-
mats: year/month/day, month/day/year, and
day/month/year. The date and date format are set
in the custom 2 section of the setup-mode menu
(p. 96).
MULTI-FUNCTION RECORDING
Date imprinting
Every time a still image is recorded, it is stored with an Exif tag that contains the date and time
of recording as well as shooting information. This information can be viewed with the camera in
the playback or quick-view mode, or on a computer with the DiMAGE Viewer software.
Camera Notes
Date-imprinting indicator
To Next Page
Loading...
Need help?
General
