The camera exposure can be adjusted to make the final picture lighter or darker by as much as
±2EV in 1/3 increments. The exposure-compensation value will remain in effect until it has been
reset. In auto-recording mode, exposure compensation is also reset when the mode dial is moved to
another position.
The exposure compensation must be set before the image is captured. When making adjustments to
exposure, the amount of compensation is shown next to the exposure-compensation icon on the
monitor. After the setting is made, the shutter-speed and aperture displays will indicate the actual
exposure. Because the exposure can be adjusted in fine steps, the shutter speed or aperture value
displayed may not change. When set to any value other than 0.0, the exposure-compensation icon
will remain on the data panel and LCD monitor as a warning.
52
AUTO-RECORDING MODE
Exposure compensation
select
enter
To adjust the exposure, press the exposure-compensation button (1).
• The exposure compensation screen will appear.
Use the left/right keys of
the controller (2) to adjust
the exposure-compensa-
tion value.
• Change in exposure
compensation is visible
in the live image on the
monitor.
1
2
Press the exposure-com-
pensation button to set the
adjustment.
To Next Page
Loading...
Need help?
General
